Injection Molder Machine 1300 ton class / Material: PP resin running at 428^OF

After purging all remaining material from barrel, 11 lbs. of Fast Clean^TM 250 is introduced into the machine.

1. Picture one depicts purging of old material (one cycle depicted per photo. Approximately 2 lbs. of material purged per cycle). Fast Clean^TM 250 is then placed into the injection machine.

2. Fast Clean^TM begins to exit the nozzle exhibiting a "wavey" appearance.

3. Third to fourth shot, purged Fast Clean^TM begins to change color.

4. Fourth to fifth shot, the old material color is nearly gone.

5. By the seventh or eigth shot, approximately 8-9 lbs. of Fast Clean^TM has passed through the machine cleaning both burnt residue and old material from cylinder.

6. By the ninth or tenth shot, Only Fast Clean^TM is exiting the machine exhibiting it's original color with no contaminants.

ONE SHOT = 40 SECONDS / COLOR CHANGEOVER OR CLEANING TIME 6 MINUTES

1. 2. 3.

4. 5. 6.